Download WordPress Themes, Happy Birthday Wishes
High Interest
Aphrodites VIP Total brands

New AudioSolutions Virtuoso model B !

Νεότερα από την AudioSolutions. Ο Λιθουανός πολυβραβευμένος σχεδιαστής ηχείων προτείνει ένα συναρπαστικό τρίδρομο βάσης, ολοκαίνουργιο μέλος της εκλεκτής σειράς Virtuoso. Το μοντέλο ονομάζεται Virtuoso “B” και αν απορείτε από την όψη του που βρίσκεται η τρίτη μονάδα (μιλώντας για το woofer), αυτή τοποθετείται στην κάτω πλευρά του ηχείου και ακτινοβολεί στον θάλαμο. Η ευαισθησία του ηχείου μετριέται και αναφέρεται εργοστασιακά στα 91.5 dB @ 2.83V 1m, η αντίστασή του στα ~4,0 ohms και τα σημεία cross των μονάδων στις συχνοτικές περιοχές 500 Hz & 7000 Hz με συνολικό εύρος απόκρισης 30-30000 Hz. Ως μονάδα των υψηλών επιλέγεται tweeter 3 εκατοστών μαλακού θόλου, για την μονάδα των μεσαίων 16.5 εκατοστών ο κατασκευαστής παραμένει πιστός στο κώνο από πεπιεσμένο και ειδικά επεξεργασμένο χαρτί. Τέλος, όσον αφορά την μονάδα χαμηλών ενσωματώνεται μια “Hard Pulp” 19 εκατοστών (7,5 ιντσών) τοποθετημένη ως “down-firing” στο κάτω μέρος της καμπίνας. Η τιμή του ανέρχεται στα 9.500,- € ενώ οι χρωματικές του επιλογές-φινιρίσματα το καθιστούν χάρμα οφθαλμών, έντεκα συνολικά στον κατάλογο της αντιπροσωπείας. Αναμένονται ακούσματα στην έδρα του, Chameleon Audio!

Dimensions (HxWxD) : 450mm x 297mm x 478mm; 17.7 x 11.7 x 18.8in , Dimensions with stand (HxWxD) : 1225mm x 391mm x 547mm; 48.2 x 15.4 x 21.5in , Weight without stand : 23 kg/50 lbs each, Weight with stand : 37 kg/82 lbs each, Sensitivity : 91.5 dB @ 2.83V 1m, Nominal power handling : 130 W rms, Maximum unclipped power handling : 260 W; Impedance : nominal 4,0 ohms Crossover frequency : 500 Hz; 7000 Hz, Frequency response (in-room environment) : 30-30000 Hz, Drivers : 3cm silk dome tweeter, 16.5cm Hard Pulp paper cone mid, one 19cm Hard Pulp cone bass driver firing down

Virtuoso speakers share a true box-in-a-box enclosure design. This system relies on an internal structure with extensive skeleton-like bracing which grants rigidity of enclosure and controls primary vibrations which are created directly by the drivers. This internal carcass is covered with lightweight material to form an inner box. Lightweight walls have very low inertia and don’t store energy. Because of that, inner cabinet ringing characteristics are very good. The outer box is being attached directly to and over the inner box. By applying more dense material with higher inner losses we eliminate any high Q spikes which can be transmitted from inner structure. Outer box works in tandem with inner box by dampening each other out. Specially calculated corner joint point’s and shape increases structural forces even further. The resulting cabinet shares properties of those aluminium or composite cabinets, but do not add high-frequency ringing and harmonics which is common in those type cabinets.

Virtuoso is equipped with a new type of speaker performance tuning device which encloses three different crossovers in one speaker to choose from. This system does not change SPL of speaker response and should not be mistaken with room/system tuning devices where levels of individual drivers are being changed. In Virtuoso we decided to take a step further and use natural drivers’ distortion pattern to manipulate listening experience.

As it is known all speaker drivers have more or fewer distortions present across the spectrum which is the natural behavior of the driver. Each driver’s distortion pattern is different which reflects as unique-sounding units – aluminium cone drivers have a metallic/harsh sound or ceramic cone drivers have analytic sound. The same is true for musical instruments. This is what makes two different violins sound tonally different, despite the same note being played. Although in music this phenomenon is called overtones rather than distortions. Technically speaking cause of both overtones and distortions are one and the same. Different overtone patterns create a unique sounding instrument with a richer or leaner, more dramatic or more neutral tone. So is with speakers. By adding more than one driver to the speaker we create a speaker system with a distortion pattern described by crossover points. By manipulating crossover’s cut-off frequency and steepness of slopes we create different distortion/overtone patterns where different portions of each driver’s distortions/overtones participate in the final system. It is a unique feature which allows us to offer you three different listening experiences without actually changing speaker technical characteristics.

AudioSolutions Adjustable Harmonics Crossover has three modes:

1. Balanced – this mode is a sweet spot with a perfect balance of musical clarity and an immersive soundstage.

2. Moderate – this mode is ideal for prolonged listening sessions when less dramatic and less detailed sound required.

3. Enhanced – engaging this mode will allow the listener to experience the finest level of musical details from their recordings. This mode is especially well suited for quiet evening listening sessions when ambient urban noise is reduced, and micro details in the music come alive. This mode can make the difference between simply listening to music and establishing an emotional connection with your music, prompting you to get up and dance or shed a tear, when listening to your favorite tunes.

Αντιπροσωπεία – Ακροάσεις – E-Shop:

 

 

About HiEndNews

A PLUS VIP
x

Check Also

Hiend News 1st digital-EXPO 2021 is OPEN ! Enjoy: Part One of Showrooms !

Η ώρα έφτασε για την πληρέστατη παρουσίαση των φετινών εκθεσιακών χώρων προϊόντων ‘Ηχου Υψηλής Πιστότητας ...

Vincent KHV-200 new hybrid headphones pre!

Πληρέστατος και προσιτός ως Vincent, ο νέος της προενισχυτής ακουστικών μοντέλο KHV-200 βρίσκεται σε γραμμή ...

Metronome’s New Digital Sharing models: DSC – DSC1 – DSS

Η Γαλλική Metronome αποτελεί μια εξαίρεση στον ψηφιακό ήχο. Τον γνωρίζει όσο λίγοι και τον ...